Gai-tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telep Manual de usuario Pagina 112
- Pagina / 172
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Parameter Modification PL1877A Microprocessor Radio Telephone Interconnect
12/10 106
Para-
meter
No.
Description
Control Digits
Refer to
Section on
Page:
30 Enable or disable auto-dial feature. 0 = Disable
1 = Enable
Default = 0
98
31 Determines whether DTMF or pulse
landline signaling is selected.
0 = DTMF land-line signaling
1 = Pulse land-line signaling
Default = 0
89
32 Determines whether PL strip relay is
automatically activated on access.
0 = Do not activate
1 = Activate
Default = 0
95
33 Determines whether “over” beep to phone
user is enabled or disabled.
0 = Disable
1 = Enable
Default = 1
103
34 Enables/disables mobile go-ahead beep. 0 = Disable
1 = Enable
84
36 Determines whether mobile DTMF
regeneration is enabled or disabled.
0 = Disable
1 = Enable
Default = 1
89
37 Determines whether mobile DTMF
regeneration, after call is established, is
enabled or disabled.
0 = Disable
1 = Enable
Default = 1
89
38 Allows the patch access, to users of multi-
digit access prefixes, to be restricted or
unrestricted.
0 = Don’t restrict patch access
1 = Restrict patch access
Default = 0
91
39 Determines whether multi-digit release
codes are tied to multi-digit access
prefixes.
0 =Don’t tie release codes
1 =Tie release codes
Default = 0
92
40 Determines whether multi-digit release
codes are suffixes to release commands or
prefixes to release commands.
0 = Suffixes
1 = Prefixes
Default = 0
92
42 Determines whether landline direct
channel access on line 2 is enabled or
disabled.
0 = Disable
1 = Enabled
Default = 0
99
43
Determines whether * access command is
required from a landline user on line 2
before allowing direct channel access or
selective signaling input.
0 = Don’t require
1 = require
Default = 0
101
44 Determines whether bypassing multi-digit
access restriction, to answer a landline call
is allowed.
0 = Don’t allow
1 = Allow
Default = 0
91
45 Determines whether DTMF 1 tone upon
automatic phone line access is enabled or
disabled.
0 = Disable
1 = Enable
Default = 0
101
- Radio Telephone Interconnect 1
- Table of Contents 3
- Foreword 7
- Scope of Manual 8
- Nomenclature 8
- Ordering Replacement Parts 8
- Service and Repair 8
- Model Chart 10
- Kit Description 11
- Specifications 12
- Description 13
- WARNING 16
- Ground Cable 17
- Power Supply 17
- ON/OFF button. To 18
- Internal Diagnostics 19
- ON/OFF buttons 21
- Level Setting 23
- PWR for this test) goes on 24
- UP and PATCH ON/OFF buttons 24
- BUSY LED. Adjust control 24
- PC Programming 25
- IAPS Programming 26
- Input/Output 27
- Serial Port Setup 28
- Call Waiting 29
- Input/Output – Read Local 30
- Talk Battery Voltage 33
- Basic Operation 34
- Access/Release Settings 38
- Signaling 45
- Station Identifier 49
- Paging – Telephone Line 50
- Paging – Attendant Paging 51
- Paging – Mobile Paging 51
- Paging – General Paging 51
- Service Adjust 57
- Wildcard Access/Release 60
- Multi-Digit Access/Release 66
- Security Code Table 67
- No. Restriction 67
- Multi-Digit Release 68
- Operator Instructions 69
- Network Signaling 70
- Half Duplex Mode 70
- Standard Commands 71
- Auto-dial 71
- Selective Signaling Option 71
- 2nd Line Option 71
- Landline Originated Calls 72
- Bypassing Restriction Table 74
- First Bypass Parameter 75
- Parameter 76
- Third Bypass 76
- Second Bypass 76
- Terminal Programming Feature 83
- ENTER. The next 84
- DTMF Programming Feature 85
- Installation Parameters 89
- Enhanced VOX Simplex Mode 90
- Carrier Detect Methods 91
- General Purpose Inputs 92
- Miscellaneous 93
- Telephone Interface 94
- Dialing Characteristics 95
- Mobile Access Methods 97
- Manual Release Methods 98
- Automatic Release Methods 99
- General Call Characteristics 100
- Selectable Features 101
- Toll Restrictions 103
- Parameter Function 103
- Autodial 104
- Entry of Auto-dial Numbers 104
- Direct Channel Access 105
- Direct Access Timer 106
- Emergency Call Direct Access 108
- Installation 109
- Miscellaneous Features 109
- OTE: This 121
- Features 123
- Selective Signaling 124
- Attendant 125
- Group Calls 125
- 2-Tone Group Calls 126
- Dual Addressing 126
- Multi-Mode 130
- Motorola 5/6 Tone 134
- 5/6-Tone Single Mode Paging 134
- Types of Paging 135
- 2-Tone Paging 135
- Group Call 136
- TRANSMIT button, the console 136
- 12/10 132 138
- Plectron Paging 139
- 5/6 Tone 140
- DPL Code # = DPL Code 142
- PL1877A – Radio Installation 143
- Parameter Setting 144
- 139 12/10 145
- P1 Cable Color To Function 146
- MAXAR and MOXY Bases 148
- MAXAR 80 Bases 151
- MICOR RCB Repeater 155
- From To Function 155
- Cable Color To Function 155
- FLEXAR Repeater 157
- Color Function Plug Pin No 157
- Radio Cable Interfacing 159
- Color Function Terminal 159
- Theory of Operation 163
- Digital Signal Processing 164
- TX Audio 164
- Radio Interface 165
- Line Interface 166
- Optional Line 2 Interface 166
- Main Circuit Board 167
- Definitions and Acronyms 171
Relacionado con productos y manuales para Comunicación Gai-tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telep
Comunicación Gai-tronics XB001 Weatherproof Long-Life Battery Enclosure Manual de usuario
(5 paginas)
(5 paginas)
Comunicación Gai-tronics ITR1000-001 Model ITR1000-001 Basic Tone Remote De Manual de usuario
(40 paginas)
(40 paginas)
Comunicación Gai-tronics 13363 Addressable Amplified Speakers Installation Manual de usuario
(57 paginas)
(57 paginas)
Comunicación Gai-tronics MI05-101 Merge / Isolate Cabinet with External Opt Manual de usuario
(24 paginas)
(24 paginas)
Comunicación Gai-tronics MS05-101 Desktop Master Station consisting of Subs Manual de usuario
(11 paginas)
(11 paginas)
Comunicación Gai-tronics 12505-004 Repl. Door Kit for Weatherproof Enclosur Manual de usuario
(3 paginas)
(3 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.075 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales