Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario descargar pdf (Pagina 49)

49 12/10

Options

DC Remote Control CP0010/XCP0010

DC Control uses a different method to control the base station, which does not provide the functionality

of a tone remote system. Therefore, certain features behave differently or cannot be used on a channel

using dc remote control. Consult with the system supervisor to understand what features are available on

each channel.

Buttons Not Applicable to DC Control

If the selected channel uses dc remote control, some features are not available. These features include

secure operation and MULTI PL. If the operator attempts to activate any of these features, an error beep

is generated.

Frequency Buttons with DC Control

The frequency buttons, F1, F2, F3 and F4 in the Frequency window, are used to change the PTT current

for the selected channel. DC channels do not support more than four different transmission currents.

Therefore, multi-frequency is not compatible with dc operation.

Monitor Button with DC Control

The MONITOR button behaves differently on a dc remote control channel than that of a tone remote

control channel. On a dc remote control channel, the monitor function is not latched; and therefore, the

operator must press and hold the

MONITOR button. While the MONITOR button is depressed, the border

of the

MONITOR button lights yellow and MONITOR is displayed on the right side of the information

window status line. When the button is released, the border of the

MONITOR button returns to its

original color and RECEIVE is displayed on the right side of the information window status line. The

channel and base station are no longer in monitor mode after the release of the

MONITOR button. This

functionality is the same for any channel monitor buttons on a dc channel.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 69 70

Sin comentarios

Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario Pagina 49