Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario descargar pdf (Pagina 45)

ICP9000 Navigator Series Console Operator’s Manual Standard Feature Operation

45 12/10

Multi-Select

The Multi-Select option allows for simultaneous transmission on a set of channels when the multi-select

mode is chosen. This can be used when the operator wishes to simultaneously communicate with several

different channels.

Using Multi-Select

The console offers two multi-selections that can be stored and

retrieved by the operator. To access the two selections, open

the Multi-Select window by pressing the

MULTI SELECT

button located in the toolbar.

When either the

MULTI 1 or MULTI 2 button is pressed, the

border of the button flashes red indicating that the selection

can now be edited and the display screen changes to the Multi-

Select screen. Channels can now be added or removed by

pressing a channel

SELECT button. When a channel is added to the multi-selection, the current

frequency F1, F2, etc., is used. If a multi-selection was previously stored, the stored channels are

displayed. When a multi-selection is recalled, the frequency on which the channel was added and

previously stored is also recalled. Pressing a channel

SELECT button toggles between select and

unselect, and by doing so, channels can be added or removed from the selection.

When the desired channels have been selected, press the main

TRANSMIT button to begin transmission

on the selected channels. Upon transmitting, the border indicator of the

MULTI button turns red

indicating that the selection can no longer be edited.

To exit multi-select without storing changes, press the appropriate

MULTI button. To store changes,

press the

SAVE/EXIT button. Upon exiting, the MULTI indicator is extinguished and the information

window returns to the normal format. The last selected channel before multi-select was initiated is now

displayed.

Signaling in Multi-Select

If the Navigator is equipped with the signaling option, PTT-ID’s are generated on all channels of the

multi-select in which PTT-ID’s have been enabled when a transmission is initiated. Additionally, the use

of a channel

TRANSMIT button on any channel that has PTT-ID enabled causes a PTT-ID to be

generated. Decode of digital signaling still occurs on either a dedicated channel or the selected channel

as described in CARD Suite. Consult with the system supervisor regarding the encode/decode of digital

signaling.

Figure 20. Multi-Select Window

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

Comentarios a estos manuales

Sin comentarios

Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Comunicación Gai-tronics ICP9000 Navigator Series Console Operator's M