Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario descargar pdf (Pagina 35)

ICP9000 Navigator Series Console Operator’s Manual Standard Feature Operation

35 12/10

Enhanced Multi-Frequency Operation

If more than four frequencies are enabled on a particular channel, the four buttons in the frequency

window operate as

SEL, UP, HOME and DOWN. This mode of operation is indicated by the UP and

DOWN button-indicators both being lit. In this mode of operation, the frequency must be selected from a

list displayed in the information window via scrolling using the

UP and DOWN buttons. To enter the

frequency selection mode, press either the

SEL, UP or DOWN button. The SEL indicator flashes and the

console enters the frequency selection mode. The channel alias on the status line of the information

window flashes indicating that a new alias or frequency can be selected using the

UP or DOWN buttons.

To return to the previously selected frequency prior to entering frequency selection mode, press the

HOME button for less than two seconds. This is useful if entry into the frequency edit mode was

accidental and the operator does not wish to change the currently selected frequency. While in frequency

selection mode, if no button is pressed for five seconds, the frequency selection mode is automatically

exited and a new frequency is not selected.

Once the desired alias is selected, the operator can:

a. press the SEL button to select the new frequency, transmit the new frequency to the base station and

exit frequency selection mode,

b. press the main

TRANSMIT button to select the new frequency, transmit the new frequency to the base

station, exit frequency selection mode and begin a voice transmission on the newly selected

frequency,

c. press the

MONITOR button to select the new frequency, transmit the new frequency to the base

station, exit frequency selection mode and place the base station in monitor mode on the newly

selected frequency, or

d. press and hold the

HOME button for at least two seconds or until the HOME indicator lights to store

the frequency as a home or revert frequency. The home frequency can now be recalled and selected

quickly outside of the frequency selection mode by simply pressing the

HOME button. Each channel

can have a HOME frequency.

If the channel has channel frequency change buttons, the associated indicator will illuminate assuming

the selected frequency is the same as that of the channel frequency change button.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 69 70

Sin comentarios

Gai-tronics ICP9000 Navigator Series Console Operator's M Manual de usuario Pagina 35