Gai-tronics VoIP Telephone Software Configuration Guide Manual de usuario descargar pdf (Pagina 80)

GAI-TRONICS

VoIP Telephone Configuration Guide Page 80 of 88

IP Module Command Line Syntax

Action

Verb

Parameters

Comment

1 2 3

SET

DHCP [ON/OFF]

Enables or disables the use of DHCP for the

assignment of IP parameters.

ADDRESS xxx.xxx.xxx.xxx Sets the static IP Address of this unit

MASK xxx.xxx.xxx.xxx Sets the static sub-net mask for this unit

GATEWAY xxx.xxx.xxx.xxx Sets the static default gateway address for this unit

DNS1 xxx.xxx.xxx.xxx Sets the IP address of the primary static DNS server.

DNS2 xxx.xxx.xxx.xxx

Sets the IP address of the secondary static DNS

server.

WEBPORT

XXXX

The TCP port through which the Telephone Web

server can be accessed (Default Value is 80)

WEB [ON/OFF]

This command enables or disables access to the web

server (Default value is ON )

TELNETPORT XX

The TCP port through which the Telephones telnet

server can be accessed (Default Value is 23)

TELNET [ON/OFF]

This command enables or disables access to the

telnet server (Default value is ON )

SYSLOGPORT xx

This command sets the port number to be used for

syslog messages. The default value is 514

SYSLOG

xxx.xxx.xxx.xxx

FQDN

This command sets the destination address for syslog

server messages.

SYSLOGPORT2 xx

This command sets the port number to be used for

syslog messages (second syslog server). The default

value is 514

SYSLOG2

xxx.xxx.xxx.xxx

FQDN

This command sets the destination address for syslog

server messages (second syslog server).

SYSLOGFACILIT

The SYSLOG message facility level, as per RFC3164.

SYSLOGSEVERI

The SYSLOG message severity level, as per

RFC3164.

STUN

xxx.xxx.xxx.xxx

FQDN

This command sets the IP address or URL for the

STUN server that will be used to resolve STUN

requests. The absence of parameter 2 will disable the

STUN facility.

SHOW ALL

Lists all the configuration settings for the IP Module.

The current static settings will be displayed along with

the current settings if the unit is using a Dynamic IP

address

PING

xxx.xxx.xxx.xxx

FQDN

Sends an ICMP ping to the IP address or the FQDN

given in parameter 1

TRACER

OUTE

xxx.xxx.xxx.xxx

FQDN

Executes a series of PING messages with varying

HOP numbers in order to determine the routing used

to reach the destination address.

9.12 LOCAL Module Command Line Syntax

Action

Verb

Parameters

Comment

1 2

SET

SPEED

9600 Sets the Port speed to be 9.6 Kbps (Default)

19200 Sets the Port speed to be 19.2 Kbps

38400 Sets the Port speed to be 38.4 Kbps

57600 Sets the Port speed to be 57.6 Kbps

115200 Sets the Port speed to be 115.2 Kbps

SHOW ALL

3XED

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Comentarios a estos manuales

Sin comentarios

Gai-tronics VoIP Telephone Software Configuration Guide Manual de usuario Pagina 80

Comentarios a estos manuales

Relacionado con productos y manuales para Comunicación Gai-tronics VoIP Telephone Software Configuration Guide