Gai-tronics L3149B C200 Advanced Deskset Manual de usuario descargar pdf (Pagina 12)

Description L3149B (C200) Advanced Tone Remote Desk Set

Signaling Buttons

Refer to the diagram above for the location of the front panel buttons. The following paging buttons are

used for paging and initiating alert tones:

 MDC  SELECT

 PAGE  DOWN

 CLEAR  UP

The function and operation of each of the paging buttons is discussed in the Operations section of this

manual.

Programmable Buttons, PROG 1/5 through PROG 4/8

The programmable buttons labeled, PROG 1/5, PROG 2/6, PROG 3/7, and PROG 4/8, can each be

configured to perform two separate functions. Depending on its configuration, the selected button

illuminates when it is pressed. It continues to be illuminated until a different button is pressed.

Volume Buttons

The units contain two buttons labeled VOLUME. They are imprinted with up and down arrows, and are

used to increase and decrease the local speaker volume and microphone levels. They are also used as

programming function keys.

Lock Button

The LOCK button is used in conjunction with other buttons to provide secondary key functions.

IC (Intercom) Button

The Intercom button, labeled IC, allows communication between desk set users without transmission over

the radio. When this button is pressed and held, microphone audio is routed to the line without activating

the radio transmitter. Other desk sets in parallel hear the audio automatically.

Monitor Button

The MONITOR button (PL/DPL disable) is used to place the radio in the monitor mode.

Transmit Button

The red TRANSMIT button is used to initiate voice transmissions. Pressing the TRANSMIT button places

the desk set in the transmit mode.

Transmit LED

The TRANSMIT LED, located to the left of the button, illuminates when transmitting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 91 92

Sin comentarios

Gai-tronics L3149B C200 Advanced Deskset Manual de usuario Pagina 12