Gai-tronics ILD1000A Local Deskset User and Installation Manua Manual de usuario descargar pdf (Pagina 12)

Operation ILD1000A Local Desk Set

02/12 8

Initiating Calls

Before initiating a call, press the MONITOR button to verify that the radio channel is clear. To initiate a

call, press the

TRANSMIT button or the handset push-to-talk (PTT) pressbar. The TRANSMIT LED

illuminates when transmitting.

Always allow a short delay before speaking to allow time for the radio channel to be established. The

TRANSMIT button or handset PTT bar must be held down while talking to the radio user and released to

listen. When the transmission is completed, the

TRANSMIT LED extinguishes and the desk set returns to

the receive mode.

Handset Transmit

Using the handset is recommended when the desk set is located in noisy surroundings. Press the handset

PTT bar or

TRANSMIT button and speak into the handset microphone.

Transmit From Internal Microphone

Use the internal microphone only in low noise environments. The handset must be on-hook for the

internal microphone to operate. Press the

TRANSMIT button and speak in the direction of the internal

microphone. For the best transmit audio quality, maintain a distance of about 12 to 18 inches from the

microphone.

Full Duplex Operation

For full duplex operation (TX and RX simultaneously) the handset must be used to speak to the mobile

user while pressing the ILD1000A

TRANSMIT button.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Gai-tronics ILD1000A Local Deskset User and Installation Manua Manual de usuario Pagina 12