Gai-tronics XCP0070A Direct Enhanced Phone Interface Kit Manual de usuario descargar pdf

Pub. 43003-018B

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374 n 800-492-1212 n Fax: 610-775-6540

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model XCP0070A

Direct Phone Interface Kit

Field Installation Kit Instructions

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains

sensitive business and technical information that is confidential and proprietary to GAI-Tronics.

GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,

and such information may only be used in connection with the operation of your GAI-Tronics product or

system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any

third party.

General Information

The Direct Phone Interface Kit adds two additional features to the ICP9000 Series Desktop Console or the

ICP9000 Navigator Series MCU:

• Phone Patch

• Radio Patch

The Model XCP0070A Direct Enhanced Phone Interface Kit includes the following components:

Qty Description

1 CTI Direct Phone Interface PCBA

1 Ground cable

#4-40 × 0.25-inch Phillips screws

#4-40 × 0.75-inch M/F standoffs

2 #4-40 hex nuts

1 2 3 4 5

Pub. 43003-018BGAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA610-777-1374 n 800-492-1212 n Fax: 610-775-6540VISIT WWW.GAI-

Pub. 43003-018BModel XCP0070A Direct Phone Interface Kit Page: 2 of 511/02InstallationICP9000 Series Desktop Console1. Disconnect power from the ICP

Pub. 43003-018BModel XCP0070A Direct Phone Interface Kit Page: 3 of 511/028. Place the CTI PCBA on the standoffs and attach with the supplied #4-40

Pub. 43003-018BModel XCP0070A Direct Phone Interface Kit Page: 4 of 511/02Figure 3.6. Attach the remaining two standoffs in the two open holes highl

Pub. 43003-018BModel XCP0070A Direct Phone Interface Kit Page: 5 of 511/027. Place the CTI PCBA on the standoffs and attach with the supplied #4-40

Sin comentarios

Gai-tronics XCP0070A Direct Enhanced Phone Interface Kit Manual de usuario