Gai-tronics IDR1000A DC Remote User and Installation Manual Manual de usuario descargar pdf (Pagina 22)

Installation IDR1000A DC Remote Desk Set Use and Installation Manual

02/12 18

Programming Mode

Important: The initial key press must be made within 3 seconds of power up.

The desk set automatically exits the program mode and returns to normal operation after 5 minutes

Programming Function

(See DC Current Magnitude Table - page 17)

Key-press

*Within 3 seconds of power up, press and release:

Program/adjust DCLOTL threshold:

*CTL+TRANSMIT

 Increase current magnitude.

then

VOLUME Up

 Decrease current magnitude.

then

VOLUME Down

 Toggle current polarity.

then

 Save as new DCTOTL threshold.

then

MONITOR

Program/adjust MONITOR dc current: *CTL+MONITOR

 Increase current magnitude.

then

VOLUME Up

 Decrease current magnitude.

then

VOLUME Down

 Toggle current polarity.

then

 Save current magnitude.

then

TRANSMIT

Program/adjust F1, F2, F3, F4 dc current: *CTL+F1 (or F2 or F3 or F4)

 Increase current magnitude.

then

VOLUME Up

 Decrease current magnitude.

then

VOLUME Down

 Toggle current polarity.

then

 Save current magnitude.

then

TRANSMIT

Continuous current is placed on the wire line during this test. The LEDs indicate the selected current

magnitude. See DC Magnitude Current Table. If the LEDs are flashing, the current polarity is negative.

RAM Diagnostic:

*CTL+IC , then

-F4-F2-F1 (within 15 seconds)

If the correct sequence is not entered within 15 seconds, the unit resets. If the correct sequence is entered,

the RAM diagnostic runs, default parameters are reloaded and the unit resets. If the RAM diagnostic

detects an error(s), the LEDs flash and the unit 'hangs' until the power is cycled.

Desk Set Reassembly

1. After making the required connections, replace the top cover on the desk set and reattach the four

screws in each corner of the back housing.

2. To wall mount, affix the desk set to the wall using the molded-in mounting holes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Comentarios a estos manuales

Sin comentarios

Gai-tronics IDR1000A DC Remote User and Installation Manual Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Comunicación Gai-tronics IDR1000A DC Remote User and Installation Manual