Gai-tronics 12520-013 Round Black Single-Pole Push-Button Asse Manual de usuario descargar pdf (Pagina 2)

Pub. 42003-251A

ODEL 12520-013 ROUND, BLACK, SINGLE-POLE PUSH-BUTTON ASSEMBLY REPLACEMENT KIT Page 2 of 4

f:\standard ioms - current release\42003 kit manuals\42003-251a.doc

03/12

4. Place the front cover assembly face down on a flat surface.

5. Use the wire cutters to snip the tie wrap that is securing the push-button assembly cable to the other

wires.

6. Unplug the push-button assembly cable connector from the PCBA. Be sure to note the location of

the connection for re-assembly.

7. Remove #4-40 screws securing PCBA to standoffs using #1 Phillips screwdriver. Pull the PCBA

away.

8. Using the appropriate screwdriver, loosen the anti-rotation screw on the mounting nut.

See Figure 1.

9. Remove and discard the mounting nut, the mounting ring, and the push-button assembly.

Figure 1. Push-Button Switch Assembly, Exploded View

1 2 3 4 5

Sin comentarios

Gai-tronics 12520-013 Round Black Single-Pole Push-Button Asse Manual de usuario Pagina 2